AL- SK13KA

Technical Specifications

Display Technology	DLP™ x1, DLP™ Projection System
Panel Size	0.8′′DMD
Resolution	3840×2400 1920×1200
Brightness Output	13000lm/14000lm (Center)
Light Source Type	ALPD5.0 Full Color Laser Light Source
Life Source Lifetime	20,000h (Standard Mode)
Contrast	≥100,000:1
Uniformity	≥92%
Display Gamut	≥110% Rec.709
Edge Blending	Horizontal & vertical edge blending
Optional Lenses	0.36:1; 0.53~0.63:1; 0.7~0.85:1; 0.85~1.1:1; 1.14~1.51:1; 1.5~2.4:1; 2.4~3.8:1; 3.8~6.8:1
Screen Size	70′′~800′′
Keystone	Corner keystone, trapezoidal, curved surface and multi-point (up to 33×33 points)
Optical Axis Shift	Vertical ±100%, Horizontal ±40%, powered
Signal Interfaces	Input Video Interface: HDMI2.02(4K/60P), DVI-D1, DP1.2 (4K/60P), HDBaseT 1.01(Optional9) 3D Syn Signal Interfaces: 3D SYNC in1，3D SYNC out1，IR 3D out1 Dynamic Contrast Syn Signal Interfaces: MULT SYNC in1，MULT SYNC out 1
Control Interfaces	Ethernet Port: RJ45; Serial Port: RS232; Infrared Extension Cable Interface: Remote IR in/out Debug Port: USB-B
Power Supply	100~240VAC 50/60Hz
Standard Power Consumption	≤800W
Stand-by Power Consumption	≤0.5W(ECO Mode)
Orientation	360°
Noise	≤38dB
Structure Measurements	21.16 × 20.08 × 7.48 inches
Structure Weight	62.83 lbs
Structure Temperature	32°CF~104°CF
Structure Humidity	20%-80%(No Condensation)
Storage Temp	14°CF~140°CF

Based on ISO21118 standard.
Full white/full black.
Not including protruding parts.
ncluding standard lens. Average value may vary from individuals.
Operation temperature will be 0°C-35°C when working under high altitude condition. Likewise, projection brightness will be reduced 50% if the ambient temperature exceeds 35°C.
The stated lifespan refers to the approximate usage time from the initial use of the projector until the light source luminosity decreases to 50%, based on accelerated testing results under simulated usage environments. This duration is not a guaranteed figure, as actual longevity may vary significantly depending on usage patterns, environmental conditions, and user habits. The brightness degradation of the projector mainly stems from laser light source attenuation, though it is not equivalent to direct laser source degradation. Operating in low-brightness mode can effectively extend the service life of the laser light source.
Calculated based on the equivalent area of the color gamut.
The test data was obtained at an environmental temperature of 25 ° .
The goods need to be pre-ordered three months in advance.