AL-SU15KA

Product Details

Superior Color Performance

RGB – Primary-colors

Appotronics has creatively applied the RGB primary-colors technology in 1-Chip DLP® system. The RGB 3-segment color wheel system has yield superior picture performance at 100% color brightness.

Color Brightness Comparision

Color brightness is a key standard for consumers to evaluate the color performance of their projectors. Lower the color brightness, lower color reproducing capability a projector will have under the same brightness. The all new S series have 100% color brightness which surpass all competitors at the same level using similar platforms.

Red Ratio 16%-18%. Higher Saturation.

Most 1-DLP® laser projectors have only a red ratio around 7%. Resulted in gloomy red color reproduction. The S series large venue machines, based on the patented ALPD® technology, yield over 16% red ratio.

Coverage Beyond Rec. 709.
Precise Color Rendition. Higher Stability.

---

Higher Flexibility in Installations

Optional Lens

5 optional lens can adapt to all kinds for installation environments. All lens have powered large scale vertical and horizontal shift.

Light Weight Design

All-new light weight design has cut the weight of the system for over 20lbs.

Multiple Color Correction Technology Provides High Uniformity in Edge Blending

Multi-color Correction provides color/brightness uniformity for any blended pictures.

Built-in Geometric Correction and Wrapping

Advanced geometric correction enables projection onto spherical, cylindrical and other non-flat surfaces.

---

Cinema Level Reliability

All-sealed light engine provides complete dust free,
filter free structure

All-new patented inner loop color wheel cooling system.

Efficient control over the working temperature of the color wheel
and motors provides higher stability and longer life span.

Powerful duo liquid cooling system provides stability even at 104°.

Light source + color wheel duo liquid cooling system provides solid stability even at 104°.

20,000h Proven Lifespan

20,000 hours lifespan proven in mission-critical situations,
including digital cinemas and command centers.

---

Technical Specifications

Display Technology	DLP™ x1, DLP™ Projection System
Panel Size	0,67’’ DMD
Resolution	1,920 x 1,200 WUXGA
Brightness Output	15,000 (Center)
Light Source Type	ALPD® Laser (Laser type: Class 1)
Life Source Lifetime	20,000h (Standard Mode)
Contrast	100,000 : 1
Uniformity	90%
Display Gamut	REC.709
Edge Blending	Horitonal & vertical edge blending
Standard Lens	1.23-1.97:1
Optional Lenses	0.62:1, 0.8:1, 1.62-2.96:1, 2.86-4.85:1 4.68-7.96:1
Screen Size	40’’ 〜 600’’
Keystone	Vertical/Horizontal ±20°
Optical Axis Shift	Vertical ±100%, Horizontal ±40%, powered
Input Resolution	1,920 x 1,200 pixels (higher resolution will be scaled to 1,920 x 1,200 pixels)
I/O	DVI x 1 / HDMI x 1 / DP x 1 / VGA x 1 / BNC x 5 / SDI x 1 / 3D SYNC x 2 (in/out) / Wired Remote M3 x 2 (in/out) / HDbaseT X 1 (compatible with RJ45) / RS232 x 2 (in/out) / USB x 1 / IR 3D OUT x 1
Power Supply	100-240V AC, 50/60Hz
Standard Power Consumption	1400W
Stand-by Power Consumption	Power saving 0.5W / Stand by 7W
Orientation	360°
Noise	35dB (ECO)/39dB (Standard)
Structure Measurements	24.4’’ x 21’’ x 7’’
Structure Weight	63.7 lbs
Structure Temperature	32°F〜104°F (95°F〜104°F Eco Mode)
Structure Humidity	20%〜80% (no condensation)
Accessories	Power cable x 1, wireless/wired remote control unit, remote control, software CD-ROM

1. Based on ISO21118 standard.
2. Dynamic Contrast
3. Not including protruding parts.
4. Including standard lens. Average value.
5. Operation temperature will be set to 32°F〜95°F when working under High Altitude Mode. Output of projector will be reduced to 50% if ambient temperature exceeds 95°F.
6. The output of the projector will have decreased by approximately 50% around this time. Data from accelerated lab simulations. Actual time may vary according to the operating modes, environment and other user behaviors.